The TAB-ECP10 mechanical eccentric press is designed for light to medium forming, cutting, and punching operations with a nominal capacity of 100 kN (approximately 10 tons). ✅ The slide stroke is 50 mm with a speed of up to 120 strokes per minute, maximum die height of 150 mm, with the ability to adjust the die height by 30 mm and a throat depth of 125 mm. ✅ The table surface (Bolster) is 220 mm from front to back and 340 mm from left to right, with a table thickness of 50 mm, a discharge hole diameter of 90 mm, and a distance between columns of 125 mm. ✅ Tilt angle up to 30 degrees to facilitate the exit of the pieces, with a 1.5 kW motor, and approximate external dimensions: front depth of 610 mm, side width of 550 mm, height of 1400 mm. Technical specifications: Model: TAB-ECP10 Nominal force: 100 kN Slide stroke: 50 mm Number of strokes/minute: 120 Maximum die height: 150 mm Die height adjustment: 30 mm Throat depth: 125 mm Table surface (front–back): 220 mm Table surface (left–right): 340 mm Discharge hole: 90 mm Distance between columns: 125 mm Table thickness: 50 mm Tilt angle: 30 degrees Motor power: 1.5 kW Overall dimensions (approx.): 610×550×1400 mm For inquiries, please contact us at the following number: ( Phone number appears when clicking the contact button )