Vehicle tracking device available And for Apple devices Location: Khaibar Contact via WhatsApp (Phone number appears when you press the contact button) Operation and Activation Method: First: Ensure there is charging credit on the SIM card, not internet data or free minutes. Second: Insert the large-sized SIM card into the device as shown in the SIM slot instructions. Third: Activate battery saving mode by sending the following code: Sleep123456 time to the SIM card number inside the device via SMS. Upon successful setup, the device will send a reply confirming battery saving activation with the following phrase: SLEEP TIME OK Usage and Location تحديد Method: Simply call the SIM card number inside the device, and the device will send you an SMS containing the battery percentage and a link to the location. When the device goes out of network range, you can send the following command: G123456# to the SIM card number inside the device. When the device re-enters network range, it will send you a message with the location. Errors, Potential Causes, and Solutions: 1- Fast battery drain: Battery saving mode is not activated. 2- When calling, the device does not send the location: Insufficient credit on the SIM card. The device is inside a building, as it only works outdoors. 3- When calling, the device is out of service: Battery is depleted. The device is out of network range. Note: If the automatic reply is delayed, the device is out of network range.