1 - CNC Router Wood Machine Size 1325 Working Area: 1300 x 2500 mm. Table Type: Normal table without vacuum system. Material Fixing: By mechanical clamps. Spindle Power: 3.2 kW (or as per model). Spindle Speed: Up to 24,000 RPM. Movement System: Rack & Pinion for X and Y axes, Ball Screw for Z axis. Motors: Stepper Motors. Control System: Directly via computer (without Hand Controller). Dwell Accuracy: ±0.05 mm. Maximum Travel Speed: Up to 25 m/min. Operating Voltage: 220/380V depending on configuration. Suitable Materials: MDF, natural wood, plywood, acrylic, PVC, and for engraving, cutting, and carving. Note: The machine is equipped with a normal table without vacuum, and operates without a DSP controller. It is controlled through the computer and its operating software. 2 - Specifications of a 4-Stage Edge Banding Machine – Chinese Made Machine Type: Automatic 4-stage edge banding. Country of Origin: China. Usage: Edging MDF, plywood, and particleboard panels with PVC, ABS, or melamine tape. Tape Thickness: 0.4 – 3 mm. Panel Thickness: 10 – 60 mm. Feed Speed: 10 – 15 m/min. Gluing System: Hot Melt glue pot. Heating Power: 1.5 – 2.0 kW. Total Power: 4 – 6 kW (as per model). Required Air Pressure: 0.6 – 0.8 MPa. Electrical Voltage: 380V / 50Hz (Three-phase). The Four Stages: Applying glue and sticking the tape. Trimming the front and back. Top and bottom edge trimming. Polishing and cleaning the edges. 3 - Wood Panel: MDF / Plywood / Beech (depending on type) Length: 3200 mm Finish: Raw / Melamine / Natural Veneer / Painted Condition: Straight and free of defects