For sale, a nearly new machine for edge banding wood panels: Specifications of the edge banding machine (tape machine) model Brandt Optimat KD 67 C: Basic Technical Specifications * Model: Optimat KD 67 C. * Country of Manufacture: Germany. * Feed Speed: 11 meters per minute. * Workpiece Thickness (Panel): Ranges from 8 to 40 mm (and in some versions up to 45 mm). * Tape Thickness: Supports tapes with a thickness ranging from 0.4 to 8 mm. * Minimum Workpiece Length: 160 mm. * Minimum Workpiece Width: 65 mm. [1, 2, 3] Electrical and Operational Requirements * Voltage: 400 V (3 Phase + Neutral) at 50 Hz [Image]. * Air Pressure: Requires an air connection at 6 bar pressure. * Dimensions: The machine's length is approximately 5240 mm. [1, 2, 3] Operational Units and Stages This machine is considered among the advanced categories that include several stages to ensure finishing quality, and its most prominent units are: [1, 2] 1. Gluing Unit: With a granular glue system. 2. End Trimming Unit: To trim excess at the ends of the panel. 3. Flush Trimming Unit: To remove excess tape from the top and bottom. 4. Corner Rounding Unit: This is the feature that distinguishes the "C" model in this category, as it provides a rounded and professional finish to the corners. 5. Scraper Unit: To smooth the edges of the tape. 6. Buffing Unit: To give the final touch and shine.