Parts & Accessories Car inspection services Autel MaxiDiag MD909 Pro Professional Device ✅ Comprehensive Diagnostics for All Systems Scan vehicle modules (Engine, Transmission, ABS, Airbag, BCM, etc.) with read/clear codes, Live Data display, Freeze Frame, and AutoScan for faults. ✅ 11 Maintenance and Reset Functions Key common maintenance functions in one device: Oil Reset, Brake Bleeding, Injector Coding, SAS, Throttle, EPB, BMS, TPMS, DPF, AFS, A/F. ✅ Bluetooth VCI (MaxiVCI V150 Lite) Wireless connection to the vehicle via Bluetooth for better freedom of movement in the workshop, with CAN FD support for newer generations. ✅ Android Platform + OTA Updates Runs on Android (9.0) with an easy interface and Over-The-Air (OTA) updates (subject to company/market policy). What exactly does the MD909 Pro offer? All Systems Scan: Access available control modules in the vehicle for more accurate diagnostics. Read & Clear Codes (DTCs): Read module faults, clear faults after repair, and review Freeze Frame data. Live Data: Monitor vehicle sensors and readings directly to help identify the cause of the fault. Advanced OBD2 Tests: Supports OBDII protocols and all 10 Test Modes, including I/M Readiness and emissions functions. Mode 6 (Enhanced): Helps track self-monitoring tests for certain emissions systems, depending on vehicle support. Maintenance Functions List (11 Functions) – Brief explanation of each function 1) Oil Reset – Oil Service Reset Reset the oil/maintenance reminder after oil and filter change or after maintenance. 2) Brake Bleeding – Brake Bleeding Activate brake bleeding procedures in modern ABS systems (if available on the vehicle) after brake fluid change or system maintenance. 3) Injector Coding – Injector Coding Enter/register new injector codes or re-initialize them in supported vehicles to improve performance and reduce vibrations/smoke. 4) SAS Reset – Steering Angle Sensor Calibration Recalibrate the Steering Angle Sensor after steering wheel replacement/disassembly, alignment, or after stability/ESP system repairs (depending on vehicle support). 5) Throttle Adaptation – Throttle Body Adaptation Relearn/re-initialize the throttle valve after cleaning the throttle body, replacement, or when RPM fluctuations occur (depending on the vehicle). 6) EPB Reset – Electronic Parking Brake Put the EPB system into maintenance mode when replacing rear brake pads/shoes, then reset after completion. 7) BMS Reset – Battery Management System Register/reset the battery in vehicles supporting BMS to ensure proper charging and extend battery life. 8) TPMS Reset – Tire Pressure Monitoring System Relearn/reset the TPMS system after replacing sensors or rotating tires (depending on the model and system method). 9) DPF Regeneration – Diesel Particulate Filter Regeneration Perform DPF regeneration for certain diesel vehicles to reduce clogging and improve performance (following safety conditions and manufacturer procedures). 10) AFS Headlamp – Adaptive Front-lighting System Calibration Calibrate the AFS system or adjust headlight aim on vehicles that support electronic calibration. 11) A/F (Air-Fuel Ratio) – Air-Fuel Ratio Sensor Reset A function related to certain systems/engines to perform adaptations or resets related to the air-fuel ratio sensor/system, depending on vehicle support. Detailed Technical Specifications (Tablet +