TP-Link AC750 Network Extender – RE200 Model: RE200 Version: Ver. 4.0 Type: Wi-Fi Range Extender Frequency: 2.4GHz + 5GHz Theoretical Speed: AC750 Color: White Port: Ethernet Condition: Used, excellent condition Supports: 5G 🔹 What does the device do? The device strengthens and expands the coverage of your existing Wi-Fi network. Example: If the router is in the living room and the signal is weak in a distant room, place the RE200 in a suitable location between the router and the room. It will receive the router's network wirelessly and then rebroadcast it to cover a larger area. No cable is needed between the extender and the router when used as a network extender; just plug the extender into the power outlet. The extender does not provide internet on its own; you must have a router connected to the internet. ⸻ 🔧 Detailed setup and connection instructions Method 1: Using WPS 1 First: Plug the extender into the power outlet next to the router, and do not connect any cable between them. 2 Wait for the extender to power on. 3 Press the WPS button on the router. 4 Within approximately two minutes, press the RE/WPS button on the extender. 5 Wait for the connection between the two devices to complete. 6 After a successful connection, unplug the extender from the power outlet. 7 Move it to a suitable location between the router and the area with weak signal. 8 Plug it into the power outlet and wait for it to reconnect to the router. 📌 Important: Do not place the extender in a location where the router's signal does not reach; it's best to place it in a location where it receives a good signal from the router so it can rebroadcast it effectively. ⸻ 📱 If your router does not have a WPS button It can be connected via mobile without a cable: 1 Plug the RE200 into the power outlet next to the router. 2 Open Wi-Fi settings on your mobile phone. 3 Search for a network named TP-Link_Extender and connect to it. 4 Open your browser and type: tplinkrepeater.net 5 The extender setup page will open. 6 Select your router's Wi-Fi network. 7 Enter your router's Wi-Fi password. 8 Complete the setup steps until the connection is successful. 9 After successful setup, move the extender to the appropriate location between the router and the area with weak coverage. ⸻ 📶 How does it work after connection? Router 📡 → Sends Wi-Fi → RE200 Receives Network → RE200 Rebroadcasts → Wider Coverage This means the device receives the router's network wirelessly and rebroadcasts it, and you don't need to run a network cable between them. I hope without bargaining on the price 📍 Location: Unaizah – Qassim. Delivery in the same region or in Melaida Thank you